Skip to main content

Filter By:

29-Inch Wheel (29ers)

$899.99 - $999.99
The SCOTT Aspect 940 is a hardtail mountain bike that is designed to be light, efficient and reasonably priced. Featuring a lockout mechanism for the fork, disc brakes and Syncros components, this is the perfect bike for the novice or budget conscious mountain biker. KEY FEATURES - Aspect 700/900 Alloy Frame - Suntour XCR32/X1-LO-R 100mm Fork - Shimano Alivio 18 Speed - Shimano Brakes - Kenda Booster
$939.99
The SCOTT Aspect 950 is a hardtail mountain bike that is designed to be light, efficient, and reasonably priced. Featuring disc brakes and Syncros components, this is the perfect bike for the novice or budget conscious mountain biker. Key Features: - Aspect 700/900 alloy Frame - Suntour XCT30-HLO 100mm Fork - Shimano Altus, 18 Speed - Tektro Hydraulic Disc Brakes - Kenda Booster Tires
$899.99
The SCOTT Contessa Active 40 is a hardtail mountain bike that features a light alloy frame. The series comes fully equipped with a Suntour fork, perfect for those always on the go. Key Features: - Active 700/900 Alloy Frame - Suntour XCT30-HLO 100mm Fork - Shimano Altus, 18-Speed - Tektro Hydraulic Disc Brakes - Kenda Booster Tires Wheel size: Sizes X-Small – Small: 27.5-inch Size Medium: 29-inch
$699.99
KEY FEATURES: - Active 700/900 Alloy Frame - Suntour XCE28 100mm Fork - Shimano Tourney 21 Speed - Tektro Mech. Disc Brakes - Kenda Booster The SCOTT Contessa Active 60 is a hard tail mountain bike that features a light Alloy Frame. The series comes fully equipped with a Suntour fork, perfect for those always on the go. Please note that bike specifications are subject to change without prior notice
$3,999.99
KEY FEATURES: - Genius Alloy Frame - FOX 36 Float Rhythm 160mm Fork - FOX Float Custom, 150mm, TwinLoc - Shimano XT-Deore 12 Speed - SRAM DB8 4 Piston Disc Brakes - Maxxis Foldable Tires The Genius has always been our favorite bike. Smart suspension, smarter features, and the smartest design lead to an unbelievable trail bike that just can't get enough. The All-New Genius, any trail, any time. TECHNOLOGIES: PATENTED INTEGRATED SUSPENSION TECHNOLOGY The new Genius applies our patented Integrated Suspension Technology. Not only does this make for a fantastic looking bike, but it also allows us to improve the bike's suspension performance. Primarily, we can engineer frames with a lower center of gravity, resulting in better handling, and a more stable, confidence inspiring ride for the end user. Additionally, the frame’s construction is stiffer around the BB, which reduces unnecessary movements laterally to the direction of the shock’s travel. It goes without saying that the shock is also protected from debris and the elements, two of the main enemies when it comes to shock performance. EXTERNAL SAG INDICATOR Setting sag and checking travel use is easier than ever before with the new Genius. An external indicator on the link allows the end user to easily set sag and identify how much travel they’re using. INTEGRATED HEADSET CABLE ROUTING The Genius features a Hixon Cockpit from Syncros, which has undergone a redesign. Integrating the cables presents a number of unique problems and the Hixon was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. EASY SHOCK ACCESS With the all-new Genius, accessing our patented integrated shock is easier than ever. Just push the button, pop off the cover, and access is yours. From here, adjusting rebound, air pressure, etc. is a mere button push away. When you're done, just pop the cover back on until you hear a "click" and off you go. TWINLOC SUSPENSION SYSTEM With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting to a lunch ride to an after-work trail shred, being able to switch from mode to mode depending on a trail's profile at the push of a lever is paramount to riding faster and having a damned good time.
$3,299.99
KEY FEATURES: - Genius Alloy Frame - Marzocchi Z2 Air 150mm Fork - X-Fusion Nude 5, 150mm, TwinLoc - SRAM NX-SX Eagle 12 Speed - Shimano Disc Brakes - Maxxis Foldable Tires The Genius has always been our favorite bike. Smart suspension, smarter features, and the smartest design lead to an unbelievable trail bike that just can't get enough. The All-New Genius, any trail, any time. TECHNOLOGIES: PATENTED INTEGRATED SUSPENSION TECHNOLOGY The new Genius applies our patented Integrated Suspension Technology. Not only does this make for a fantastic looking bike, but it also allows us to improve the bike's suspension performance. Primarily, we can engineer frames with a lower center of gravity, resulting in better handling, and a more stable, confidence inspiring ride for the end user. Additionally, the frame’s construction is stiffer around the BB, which reduces unnecessary movements laterally to the direction of the shock’s travel. It goes without saying that the shock is also protected from debris and the elements, two of the main enemies when it comes to shock performance. EXTERNAL SAG INDICATOR Setting sag and checking travel use is easier than ever before with the new Genius. An external indicator on the link allows the end user to easily set sag and identify how much travel they’re using. INTEGRATED HEADSET CABLE ROUTING The Genius features a Hixon Cockpit from Syncros, which has undergone a redesign. Integrating the cables presents a number of unique problems and the Hixon was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. EASY SHOCK ACCESS With the all-new Genius, accessing our patented integrated shock is easier than ever. Just push the button, pop off the cover, and access is yours. From here, adjusting rebound, air pressure, etc. is a mere button push away. When you're done, just pop the cover back on until you hear a "click" and off you go. NUDE SUSPENSION TECHNOLOGY Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer. TWINLOC SUSPENSION SYSTEM With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting to a lunch ride to an after-work trail shred, being able to switch from mode to mode depending on a trail's profile at the push of a lever is paramount to riding faster and having a damned good time.
$1,699.99 - $1,999.99
The SCOTT Scale 940 features an ultralight Carbon Frame, RockShox suspension, a SRAM Eagle drivetrain, and Syncros components to create a durable and affordable hardtail designed for world-class speed. Key Features - Scale Carbon HMF Frame - RockShox Judy 100mm - RideLoc 2-Position Remote - SRAM NX-SX Eagle 12 Speed Drivetrain - Shimano Disc Brakes - Syncros X-25 Rims - Schwalbe Rapid Rob Tires - Syncros Parts
$1,399.99 - $1,599.99
KEY FEATURES: - Scale Alloy 6061 Frame QR - RockShox Judy 100mm Fork - RockShox PopLoc Remote - SRAM NX-SX 12 Speed - Shimano Disc Brakes - Maxxis Rekon Race Tires Balancing the ALL-NEW Scale's DNA, we've created a whole new breed in the world of hardtail mountain bikes. A racing-inspired geometry, coupled with a straightforward and sharp design provides the all-new Scale 900 line with its distinctive character and aggressive look, a bike that proudly flaunts its definitive characteristics. This rig is ready for just about anything, are you?
$999.99 - $1,499.99
The SCOTT Scale 970 comes fully equipped with a SRAM Eagle 12-speed drivetrain and a RockShox fork, along with Remote Lockout technology to allow for multiple travel settings to adjust to riding conditions. Key Features - Scale Alloy 6061 Frame Boost QR - RockShox Judy 100mm Fork - RideLoc 2-Position Remote - SRAM SX 12 Speed Drivetrain - Shimano Disc Brakes - Syncros Rims - Maxxis Rekon Race Tires
$999.00
Find new adventures on the mountain-taming Scott Scale. The Scale 980's ultralight alloy frame, RockShox suspension, SRAM 1x11 drivetrain, and Syncros components create a durable and affordable hardtail designed for world-class speed. Alloy rims wrapped in grippy Maxxis tires offer confident tracking over a wide range of terrain, and Shimano hydraulic disc brakes offer precise speed control.
$4,599.99 - $4,799.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 930. Why you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF-Alloy Frame - FOX 34 Float Rhythm 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - Shimano XT-SLX 12 Speed - Shimano Deore 4 Piston Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$2,999.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 960. Why, you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Alloy SL Frame - RockShox Judy 130mm Fork - X-Fusion Nude 5, 120mm, TwinLoc - Shimano XT-Deore 12 Speed - Shimano Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. TWINLOC SUSPENSION SYSTEM With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting to a lunch ride, to an after-work trail shred, being able to switch from mode to mode depending on a trail's profile at the push of a lever is paramount to riding faster and having a damned good time.
$2,999.99 - $3,399.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the all new Spark 960. Why, you ask? Well, beyond the fact that it is fast, lightweight and ultra capable on all sorts of terrain, it's just damned good lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Alloy SL Frame - RockShox Judy 130mm Fork - X-Fusion Nude 5, 120mm, TwinLoc - Shimano XT-Deore 12 Speed - Shimano Disc Brakes - Syncros X-30SE TR Rims - Schwalbe Wicked Will Tires - Syncros Dropper Post and Parts
$2,599.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 970. Why you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Alloy SL Frame - RockShox Judy 130mm Fork - X-Fusion Nude 5, 120mm, TwinLoc - SRAM NX-SX Eagle 12 Speed - Shimano Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. TWINLOC SUSPENSION SYSTEM With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting to a lunch ride, to an after-work trail shred, being able to switch from mode to mode depending on a trail's profile at the push of a lever is paramount to riding faster and having a damned good time.
$4,999.99
KEY FEATURES - Spark RC Carbon HMF Frame - FOX 34 SC Float Perf. 120mm Fork - FOX Nude 5 EVOL, 120mm, TwinLoc - Shimano XT 12 Speed - Shimano XT Disc Brakes - Maxxis Rekon Race Foldable Tires The Spark RC Team is the perfect blend of top-notch carbon engineering, never before seen levels of integration and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. Please note that bike specifications are subject to change without prior notice.
$899.00
Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake and dropper post housing - 159 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts
$3,325.00
Flow Seeker A trail mountain bike that is primed for grinding climbs, mashing flats, and ripping descents. One for all, and all for fun! Where it thrives Out in the elements What it's built for Trail riding fun Highlights - SmartForm C1 Alloy Frame / SRAM NX Eagle 12-speed drivetrain - Rockshox Pike Select 140mm fork / Deluxe Select+ shock - SRAM G2 R 4-piston hydro discs / TranzX dropper post Suspension Built for You A rider's center of gravity drives how the suspension performs, yet most bikes use the exact same layout for all sizes. Proportional Response Suspension alters the design by size for truly net-level prefornace. Proportional Response Full size-specific frame geometry, right down to the chainstay lengths. Keep the rider centered between the wheels for incredible traction and handling. Downtube Protection Have peace of mind, knowing a rugged rubber guard is protecting your piece.
$4,163.00 - $5,550.00
Thrill Seeker The Habit LT is a progressive trail mountain bike that is down for the ups but lives to get down. Precisely tuned for controlled chaos. Highlights - Full Carbon frame / SRAM GX Eagle 12-speed drivetrain - Rockshox Pike Lyrik Select+ 150mm fork / Super Deluxe Select+ shock - SRAM Code R 4-piston hydraulic discs / DownLow dropper post Built for you The Habit geometry is uniquely size specific. With our Proportional Response Design, everything from the suspension layout to, the geometry —even the length of the chain stays — is completely customized by size. Performance built, just for you. Calibrated for Control Boasting a slacker head tube angle of 64.7° and laid-back seat tube at 77°, the Habit LT puts you in an optimal position to shred the descents and control your steed with unshakable confidence. Easy to love Keeping things simple and easy for the rider with threaded BBs, universal derailleur hanger, standard shock mount, internal cable routing, and an updated 55mm chain line standard for tire clearance. All designed to make it as easy as possible to live with and to love.
$1,100.00
What You Need Full-tilt-boogie trail capability meets hardtail purity and simplicity. That's the beauty of Habit HT. Minimum fuss. Maximum fun. Where it thrives Trails of all kinds What it's built for Good times in the dirt Highlights: - Light, durable SmartForm C2 Alloy frame / SR Suntour XCR LO Boost fork - Wide range microSHIFT Advent X 10-speed shifting / Shimano MT200 hydraulic disc brakes - Fast-rolling WTB Breakout 2.3" tires / TranzX dropper post Technology: Rugged - When it's time to mess around, Habit HT doesn't mess around. The beautifully burly aluminum frame takes whatever the trail is dishing out and comes back for seconds. Rowdy - Habit HT lives to let loose. Its dialed trail geometry can crush miles or session lines – or both on the same ride. Playful? Yup. Stable? Very. Fun? You have no idea. Ready - Stout 130mm forks. Wide rims and big tires. Big-range 1x drivetrains, powerful brakes, and dropper posts. Ready-to-rock components mean Habit HT won't let you down when it's time to get sendy.
$6,150.00
Scalpel SE is the ultimate marathon racer and high-speed trail slayer. World Cup fast and all-mountain fierce, this is next-level cross-country mountain bike performance.
$535.00
A mountain bike built to raise your game and ignite a passion for the trail. Designed for the mountains and ready for anything.
$535.00 - $645.00
Level Up. A mountain bike built to raise your game and ignite a passion for the trail. Designed for the mountains and ready for anything. Highlights - Light and durable SmartForm C3 Alloy frame - SR Suntour M3030 suspension fork, 75mm travel - 7-speed drivetrain w/ double chainring cranks / Tektro mechanical disc brakes Where it thrives: Low-impact trails, gravel roads, leisurely ride What it's built for: Handling, durability Wheel size: - Sizes X-Small – Small: 27.5-inch - Sizes Medium – X-Large: 29-inch
$535.00 - $645.00
Level Up A mountain bike built to raise your game and ignite a passion for the trail. Designed for the mountains and ready for anything. Where it thrives: Low-impact trails, gravel roads, leisurely ride What it's built for: handling & durability Highlights - Light and durable SmartForm C3 Alloy frame - SR Suntour M3030 suspension fork, 75mm travel. - 7-speed drivetrain with double chainring cranks/ Tektro mechanical disc brakes SmartForm C3 Alloy Simple yet sophisticated aluminum construction yields a light, lively frame that outperforms anything in its class SAVE Micro-suspension Delivers a smoother, more controlled ride thanks to strategically engineered flex zones built into the frame's rear triangle Slack and Stable A slack 68-degree head angle creates exceptionally stable handling so that you can charge the descents with confidence Right-Sized Wheels The smaller sizes of Trail roll on 27.5" wheels, while the larger sizes come with 29" wheels to deliver the best blend of fit, fast, and fun for every rider StraightShot Internal Cable Routing For an integrated look and easy maintenance, the shift and dropper post cables route cleanly through the StraightShot window in the down tube, while the rear brake line is secured outside the frame
$535.00
Level Up. A mountain bike built to raise your game and ignite a passion for the trail. Designed for the mountains and ready for anything. Where it thrives Low-impact trails, gravel roads, leisurely ride What it's built for Handling, durability Highlights - Light and durable SmartForm C3 Alloy frame - SR Suntour M3030 suspension fork, 75mm travel - 7-speed drivetrain w/ double chainring cranks / Tektro mechanical disc brakes
$959.00
Whether it's tearing around an XCO track or setting your personal best up a local hill, the Twostroke has you covered. RADICAL GEOMETRY - A 67° head angle, long front-end, and 75° seat angle to attack steep and loose terrain with the perfect weight distribution. INTERNAL CABLE ROUTING - Fully guided internal cable routing for easy installation and a clean look. INTEGRATED PROTECTION - Molded covers on the chainstay, an integrated chain suck plate, and helicopter tape on the downtube ensure durability and a sleek design. WIDE TIRE CLEARANCE - Fully compatible with the new generation of wide XC tires.
$839.00
Whether it's tearing around an XCO track or setting your personal best up a local hill, the Twostroke has you covered. RADICAL GEOMETRY - A 67° head angle, long front-end and 75° seat angle to attack steep and loose terrain with the perfect weight distribution. INTERNAL CABLE ROUTING - Fully guided internal cable routing for easy installation and a clean look. INTEGRATED PROTECTION - Molded covers on the chainstay, an integrated chain suck plate and helicopter tape on the downtube ensure durability and a sleek design. WIDE TIRE CLEARANCE - Fully compatible with the new generation of wide XC tires.
$4,999.00
Blackthorn C SLX stands out in the carbon all-mountain bike field for its capability and value. The progressive geometry feels planted on descents and steep climbs. A 160 mm Fox Float X Performance fork and 140 mm RockShox Lyrik Select+ RC shock with Split Pivot suspension design grants you the poise to plow through rock gardens, send drops, and hit doubles with confidence. Blackthorn brings you the benefits of pack-free riding, thanks to the integrated down tube strap, top tube mounts, and a bottle mount. Shimano's SLX 1 x 12 drivetrain and four-piston brakes are components you can rely on. We designed Blackthorn C SLX from the dirt up to lead the all-mountain category. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.
$6,799.00
For an all-mountain bike with an adventurous side, Blackthorn C XT is the ticket. We designed the stiff carbon fiber frame around progressive geometry that feels planted on descents and climbs. We paired Blackthorn XT's 160 mm Fox Float 36 Performance Elite GRIP2 fork with a 140 mm Fox Float X Performance Elite shock that runs on our Split Pivot suspension platform for excellent small-bump compliance and support. A padded tube strap spot, top tube mount, and bottle mount allow for pack-free riding or extending your range. The Shimano XT 1 x 12 drivetrain and four-piston brakes keep you in control through testing terrain. Blackthorn C XT is a brilliant all-mountain bike equipped for a wide variety of singletrack adventures. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.
$4,399.00
Blackthorn SLX is all-mountain with a side of adventure. The stiff and durable aluminum frame uses our progressive trail geometry for a ride feel that's equal parts downhill ripper and stable climber. The Split Pivot suspension design builds on those qualities with supple-to-supportive travel linked to a 140 mm RockShox Super Deluxe Select+ shock. Paired with a 160 mm RockShox Yari RC fork, Blackthorn has the chops for those rugged lines you've been eyeing. On-bike cargo features like the integrated down tube strap, top tube mounts, and a bottle mount let you keep the ride essentials on your bike rather than your back. Shimano's SLX componentry means a smooth-shifting 1 x 12 wide-range drivetrain, while the four-piston brakes offer all the stopping power you'll need. Blackthorn is a clever and capable rig that brings a lot to the all-mountain table. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Purpose-Tuned Suspension The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. Progressive Geometry Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS Carbon Main Triangle with Carbon Seatstays and Aluminum Chainstays EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. Top Tube Accessory Mounts Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. Down Tube Three-Pack Mounts Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. Integrated Repair Kit Location Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) Accommodates a 26 oz Bottle All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. Internal Sleeved Cable Routing Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. Molded Frame Protection Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. Chain Guide-Compatible Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). Stealth Dropper Post Routing Compatible with 30.9mm dropper posts for true trail bike performance. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
$4,999.00
Cassidy C SLX gives you confidence in your lines. The carbon frame tracks straight through rock gardens and over obstacles, supported by RockShox's Super Deluxe Select+ shock and ZEB Select+ RC fork—good for 165 mm rear and 180 mm front travel. The geometry is long, low, and slack enough to tame the steepest descents, but still lets you earn your turns on the climb back up. Our Split Pivot suspension design is compliant and efficient, promising predictable braking and excellent traction. On-bike cargo features include a padded tube strap spot, top tube mount, and full-size bottle clearance for longer rides and less weight in your pack (if you need one at all). The Shimano SLX 1 x 12 groupset is renowned for its reliable performance. Ready to rip? KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
Page 1 of 3 Next page