Parts

The direct mount chainrings for SRAM cranksets with the 3-bolt mounting interface. They replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in the Drop-Stop B tooth profile, which is optimized for SRAM Flattop chain. It is also compatible with all other 9-, 10-, 11-, and 12-speed chains except the Shimano 12-speed chain. Compatibility: - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that these chainrings are NOT compatible with SRAM 8-bolt direct mount cranksets. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - There is one offset: Standard Road/CX/Gravel: 6mm offset for cyclocross and road crank applications with 47mm chainline - Praxis Works Road/CX cranks use the 6mm offset. - If using a 9-speed drivetrain, use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP B - Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC - Not compatible with 12spd Shimano HG+ chains Recommendations - - Recommend the use of a clutch style rear derailleur for the best chain security. - An L-wrench works best since the crank spindle may contact a socket adapter and prevent it from engaging properly. - Use the same 3 bolts to attach the Wolf Tooth ring or we carry replacement bolts Tech Specs: - Weights: 38T/90g | 40T/106g | 42T/111g - Material: 7075-T6 aluminum - Made in the USA

- Extended range aluminum cog for those wanting 1x10 with a full range of gears - Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs) - Requires removal of the 17T or 15T cog and spacer from existing cassette - Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs - May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines - Designed and manufactured in the USA from 7075-T6 aluminum alloy

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation

The Whisky compression plug for carbon forks is reliable and easy to use. The simple design offers excellent support and function, works great with Whisky carbon forks, and may fit other manufacturer's forks as well.

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Step, snap, and ride with confidence using the SPEEDPLAY easy tension walkable road cleat. While retaining all the advantages of the SPEEDPLAY Bike Pedal System, the easy action spring mechanism makes it a breeze to clip in and out. Enhanced walkability and adjustability make this bike cleat comfortable and functional for every level of cyclist. What's Included? - Cleat Assembly - Screw Packet - Quick Start Guide - Important Product Information Guide - Additional Tools Required for Assembly: #2 Philips Head Screwdriver

Make every effort count with the SPEEDPLAY standard tension road cleat. This integrated system delivers the power and engagement required to take on everything from steep climbs to all out racing. The only system to feature continuous 3-axis adjustability for all out performance and comfort on the bike. What's Included? - Cleat Assembly (Including Cleat Surrounds) - Screw Packet - Quick Start Guide - Important Product Information Guide - Additional Tools Required for Assembly: #2 Philips Head Screwdriver

Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs. - Weight: 224g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 39º - Bearing: Sealed

The Rocket is an incredibly versatile saddle. From a two minute hair-raising downhill to a 2700-mile individual time trial, this saddle is the top choice for those pushing the sport. - Narrow nose and midsection means no chafing during long pedaling sessions - Thick padding and a swooped tail allow riders to lock in their ideal position for power and comfort - Steel rails

The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Steel rails

Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

- Works with all XPRO and XPRESSO pedals. - Not included with new XPRO and XPRESSO pedals. - This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

The XPRO 10 is TIME’s top blend of performance and value in a light weight and ergonomic race-ready pedal. The pedal maximizes power transfer and stability thanks to its large 725mm-squared surface area. The pedal’s bottom fairing helps improve aerodynamics and protect the carbon blade. TIME’s patented pre-opened ICLIC system allows for fast and easy cleat engagement. TIME pedals are designed to eliminate pedal-induced discomfort. You can precisely manage tightness of the clamping mechanism with three settings of the tension adjustment on the carbon blade. TIME XPRO pedals offer three options for spindle length to provide riders with more ergonomic options. The pedal’s low stack height provides good clearance. The XPRO 10 uses a hollow steel axle, making it strong but light. - High performance, light, ergonomic at the right price - Carbon fiber body with hollow steel spindle making it strong, but light - Fast and easy cleat engagement with three tension settings of the carbon blade - ICLIC Float Cleat allows float angularly and laterally while clipped in - Low stack height for good clearance - ICLIC Cleats included

- Built for everyday use and features a stainless steel top plate and a hollow, steel axle. - A low stack height, an oversized pedal platform, and a carbon blade with three tension settings make this a very comfortable and efficient pedal. - The ICLIC system requires only a light step to clip-in, making it a very easy pedal to enter. Specs: - Pedal Material: Composite - Pedal Weight: 115g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

- Power transfer and stability are maximized with a large, 725mm2 surface area. - Bottom fairing to improve aerodynamics and protect the carbon blade. - TIME's patented preopened ICLIC system allows for fast and easy cleat engagement. - Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. - Hollow, stainless steel axle. Specs: - Pedal Material: Carbon - Pedal Weight: 113g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

TRP Disc Brake Pads - Semi-Metallic, Steel Backed, For Hylex, Hylex RS, and HD-T190 Flat-Mount Calipers

The Syncros Creston iC is the ultimate in terms of integration on the road. Clean and uncluttered our new Syncros combo cockpit allows us to route all the cables completely internally through the bar, headset and into the frame as part of SCOTT’s new ICC routing. - Carbon UD, Superlight Layup - Compact Bend 75mm/125mm Reach/Drop - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: 1-1/4" for Scott Addict RC MY20 - Weight: 280g

KEY FEATURES: - Fits Scott Scale & Spark MY17 Scale & Spark MY17 Carbon, 1 1/8" - 1.5" Tapered, Drop-In, IS42/28.6 | IS52/40, plastic topcap with L-shape, sealed ACB cartridge bearings, 8.2mm stack height. BEARINGS: Sealed cartridge bearings FEATURES - For Scott Scale & Spark MY17 Carbon - Including plastic topcap with L-shape

KEY FEATURES: - Fits Scott Genius My18 onwards Genius 1 1/8"—1.5" Tapered, Press Fit, ZS44/28.6 | ZS56/40, Alloy, sealed cartridge BEARINGS: Sealed cartridge bearings FEATURES - For Scott Genius MY18 Carbon - Including plastic topcap with L-shape

KEY FEATURES: - Fits Scott Spark Carbon MY22 - Carbon fiber cups Replacement headset for the Scott Spark Model year 22 onwards, carbon model. BEARINGS: Sealed cartridge bearings FEATURES: - Compatible with Spark MY22 carbon - Fiber cups

- Fits Scott Plasma 5 bikes - 1"-1-1/8" Tapered - Drop-In - IS31/25.4 | IS41/30 - Alloy - Sealed cartridge

The RR 1.5 stem offers the rider or mechanic the ability to change the stem without cutting the disc brake cables while simultaneously offering a fully integrated cable setup. A removable top allows for easy access while a magnetic stem cap cover completes the minimalist look. KEY FEATURES - Designed for road use - Internal cable routing - Forged and machined AL7075 body - Hook type face plate for integrated design - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - Incl. Stem cap and bolt - Spacer kit and cap included

Designed for the SCOTT Spark RC, the XC1.5 stems have a low stack height and negative rise for mountain bikers looking for a low handlebar position. Across the range of stem lengths available only the reach changes as we have maintained the stack height across all sizes. The optimized aluminum construction achieves the perfect balance of strength, stiffness and weight. 3D forged from 7075 alloy. Key Features - For the 2021 SCOTT Spark RC - XC focused - Negative geometry for XC racing - Options from 50-90mm lengths

Designed for the SCOTT Spark RC, the XC2.0 stems have a low stack height and negative rise for mountain bikers looking for a low handlebar position. Across the range of stem lengths available only the reach changes as we have maintained the stack height across all sizes. The optimized aluminum construction achieves the perfect balance of strength, stiffness and weight. Key Features - For the 2021 SCOTT Spark RC - XC focused - Negative geometry for XC racing - Options from 50-90mm lengths

Characteristics: - long lasting, high endurance pad compound - very easy modulation of braking force - high temperature stability for consistent brake power - organic formula is low noise and rotor friendly Fits: Shimano: - Dura Ace BR-R9170 - Ultegra BR-R8070 - XTR BR-M9100 - BR-RS805 - BR-RS505 - BR-RS405 - BR-RS305 Tektro: - HD-R310 - REVER - MCX1 Flat Mount